Product Categories

Contact: Eunice Kuang

Tel: +86-21-61998187

Mobile: +86 183 2101 4782

Email: sales@eqmetal.com

Website:www.eqmetalwork.com

Home > Company News > Content
High Degree Of Standardization Of Junction Box
- Aug 14, 2017 -

The junction box is one of the electrician's accessories, because the wires in the electrical circuit are through the tube or the cable tray, and the connector parts of the wires (for example, the line is longer, or wire pipe to the corner) to use junction box as a transition, wire and junction box connection, wire tube inside the wiring box connected to protect the wire and connect the role of wire, this is the junction box.

In the home Decoration, junction Box is one of the electrician accessories, because the decoration of the wire is through the wire pipe, and in the connector part of the wire (for example, the line is relatively long, or wire pipe to the corner) to use junction box as a transition, wire and junction box connection, Junction Box wire tube inside the wiring box connected to protect the wire and connect the role of wire, this is the junction box.

The general domestic wiring box is 86 type, is roughly in $number millimeter or so, with junction box cover (or directly with switch and socket panel), Junction Box is generally PVC and tin box material.

The thin-walled sheet metal structure of the junction box, the welding part is reduced, the seal adopts the sealing and extruding structure, the wiring terminal arrangement is reasonable, the electrical gap and the creepage distance are big, satisfies the voltage range is wide; the circular mounting fixing can be used for all motor structural types, junction box with good performance, a series of universal, Junction Box high degree of standardization, high level of protection, beautiful appearance, light weight, low cost, electrical safety measures equipped with a full range of characteristics, can improve the quality of the entire motor products, Junction Box improve product safety and reliability.

Do you know the installation steps of the junction box? We have many years of work experience to answer for you.

I. Installation steps:

1, first by the furniture company in the furniture table to cut a mounting hole (please note that different products of different sizes);

2, the junction box into the open mouth;

3. Fixed junction box with screws;

4, connect the cable, pay attention to the pop-up wiring box cable length to stay, Junction Box for the junction box can be successfully bounced;

5, the cable reasonable cloth;

Note:

1 must confirm the hole size;

2 If it is their own openings, must not open the hole, Junction Box need professional tools to cooperate;

3 To Install junction box, do not tear the junction box surface Protection film;

4 junction box panel Edge thinner, pay attention to scratches, bump;

5 cable to stay length should be able to take the junction box all out of the table, 25cm range around.